China Electric Power Assisted Steering System wholesale customized
- DECO
- CHINA
--- We design and produce recirculating ball electric power steering for medium truck,Light truck and pickup truck.
--- We offer steering solution for advanced driving assistance system of medium truck who need smart driving.
---Capacity: ~1.5+ kN.m output torque from pitman arm.
Recirculating ball type Electric Power Assisted Steering System (RB-EPS) FOR Pickup truck
Applicable vehicles
Since 2015, we cooperate with Zhengzhou Nissan to develop the world's first forward-developing Recirculating ball type Electric Power Assisted Steering System (RB-EPS) .The road test is completed by the end of 2017. Batch production is realized.
Suitable for Commercial vehicles/Pickup truck/Mini-truck/Light truck
Note: We also have a solution for full or partially Autonomous applications. Please contact us with your requirements.
Structure
How it works
The EPS system replaces the existing steering system.
A motor and torque sensor are integreted in the Reduction.
The torque sensor monitors the amount of force applied by the driver.
This signal is fed into the EPS ECU where the motor delivers the appropriate amount of assistance to power the steering rack.
The vehicles speed is also sent to the ECU and combined with the force and direction signal.
Reduction device uses a series of recirculating balls on a worm shaft to transfer steering-wheel movement to tire and wheel movement.
The steel balls within the reduction housing constantly recirculate within the guide paths.They move from one end of the ball nut through return guides to reenter the ball nut at the opposite end.The balls provide low-friction contact points between the worm gear and the internal grooves of the ball nut.
The sector shaft (output shaft) of the recirculating-ball steering box uses a pitman arm for an output device.
Various products for you to choose
We offer customized motor and controller to increase the maximum torque according to your requirements.
Technical Specification
Item | Data | Data | |
Applied to Vehicle | Pickup Truck | Light Truck | |
Input Torque | 0-9NM | 0-9NM | |
Output Force | 0-800N.M | 0-1500N.M | |
ECU | Supply Voltage | 10.8-16V | 10.8-16V |
Damping control | Yes | Yes | |
Return-to-center Control | Yes | Yes | |
Protocol | CAN/K-LINE | CAN/K-LINE |
The maximum torque output shaft in the chart is not including driver's input force.
Benefits
The integrated ECU sits alongside the motor on the Reduction, providing a flexible and cost-effective package.
Assisting power adjustable with different mode.
Data available over CAN bus(only for the vechile supporting CAN bus).
Can achieve the active return ---Help steering wheel to return middle using angle sensor.
Can work in high temperature and other harsh environment.
Capable of designing according to customers' requirements.
Compared with the hydraulic system:
No need for extensive after-sales maintenance;
Only work when turning steeering wheel, saving energy;
No liquid leakage hazard, environmental protection.
Do you have any questions about our products, technical details or spare parts? Then get in touch with us by email! We will get back to you shortly. Our email address is export@decotj.com.
About Us
The professional solution providers of EPS for you.We can design customized products catering to various customers' requirement.
---Production facilities
---Research&Development
---Test and lab
--- Road test
We put our new EPS on customer's vehicle for All-terrain road test and finished over 6000km.
--- Patents
We respect the value of the knowledge and gained more than 30 patensts. The amount is still growing. We have gotten CE certifacate and TS16949 Quality System Certification.
electric power steering package color or neutral carton package :
1 set per carton;
size of carton :43cm*42cm*16cm;
neutral white boxes and paper cartons.If you have legally registered brand, we can pack the goods in your branded boxes after getting your authorization letters
Any question in future, feel free to liaise with me at anytime.
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.