Recirculating ball type electric power steering kit (RB-EPS) FOR Medium Truck

Applicable vehicles 

In 2015, we began to develop recirculating ball type electric power steering (RB-EPS). In 2017, we began to develop RB-EPS which can be applied up to 6 ton truck. This products can be applied to :

•  Suitable for commercial vehicles with total weight lower than 6 tons. 

Note:  We also have a solution for full or partially Autonomous applications. Please contact us with your requirements.

Structure

How it works

• The EPS system replaces the existing steering system.

• A motor and torque sensor are integreted in the Reduction.

• The torque sensor monitors the amount of force applied by the driver.

• This signal is fed into the EPS ECU where the motor delivers the appropriate amount of assistance to power the steering rack.

• The vehicles speed is also sent to the ECU and combined with the force and direction signal. 

• Reduction device uses a series of recirculating balls on a worm shaft to transfer steering-wheel movement to tire and wheel movement.

• The steel balls within the reduction housing constantly recirculate within the guide paths.They move from one end of the ball nut through return guides to reenter the ball nut at the opposite end.The balls provide low-friction contact points between the worm gear and the internal grooves of the ball nut.

• The sector shaft (output shaft) of the recirculating-ball steering box uses a pitman arm for an output device.

Various products for you to choose

We offer customized motor and controller to increase the maximum torque according to your requirements.

Technical Specification

The maximum torque output shaft in the chart is not including driver's input force.

Benefits

• The integrated ECU sits alongside the motor on the Reduction device, providing a flexible and cost-effective package.

• Assisting power adjustable with different mode.

• Data available over CAN bus(only for the vechile supporting CAN bus).

• Can achieve the active return ---Help steering wheel to return middle using angle sensor.

• Can work in high temperature and other harsh environment.

• Capable of designing according to customers' requirements.

  
  

Compared with the hydraulic steering system:

--- No need for extensive after-sales maintenance on the hydraulic pipe system; 

--- Motor only work when turning steering wheel, saving energy; 

--- Assisting force output changes according to the vehicle speed. At low vehicle speed,high assisting power is offered to make the steering lighter; At high vehicle speed, low assisting power is offered to make the steering heavier and stable. 

--- No liquid leakage hazard, environmental protection.

Do you have any questions about our products, technical details or spare parts? Then get in touch with us by email! We will get back to you shortly. Our email address is export@decotj.com.

About Us

The professional solution providers of EPS for you.We can design customized products catering to various customers' requirement.  

---Production facilities

---Research&Development 

---Test and lab

--- Patents

We have applied more than 30 patents and gotten CE certificate and TS16949 Quality System Certification.

electric power steering package color or neutral carton package :

1 set per carton;

size of carton :43cm*42cm*16cm;

neutral white boxes and paper cartons.If you have legally registered brand, we can pack the goods in your branded boxes after getting your authorization letters

Any question in future, feel free to liaise with me at anytime.  

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, 
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages 
before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends 
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:

1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.